More detailed Information Regarding iSense for the iPhone

IMPORTANT:  IF YOU FIND THE FOLLOWING  INFORMATION IS IN ERROR, PLEASE CONTACT ME OR POST A COMMENT IMMEDIATELY.

You can search every article on this blog; but, you will not find a single post were I cut & pasted a press release.  But, because I think the iSense for the iPhone6 is such a huge deal, I'm going to make an exception in the case for the iSense for the iPhone/iPad.

But, first, I am going to try to clarify, to the best of my understanding, what the iPhone/iPad minimum requirements are to successfully use the updated iSense.


Operating System Requirements

The operating system must be iOS 7 or later.  And the CPU must be the Apple A6X, A7.

iPhone Minimum Requirements

The new iSense scanner ONLY works with the iPhone6 or iPhone 6 Plus.  It is attached to the phone with a custom phone case designed specifically for the iPhone 6 series.

Click to see the iPhone6 iSense Case Detail

Even though the iPhone 5 has the proper connector, the scanner is NOT designed to work with the iPhone5.  The iPhone5S uses the A7 chip, so it's confusing as to whether we could get it work or not, aside from the case size differences.  I have an iPad Mini 2, so I should be safe there, and iPhone5S that may or may not work.  But, I have to say that the iSense for the iPhone is important enough for me to happily upgrade to the iPhone6.  :)

 iPad Minimum Requirements

It's a little more difficult to determine exactly which iPads will work with the new iSense.  The press release simply says "Discover the power of mobile 3D scanning on your iPhone, iPad, iPad Air, iPad Air 2 or iPad mini with the new iSense."  But, it does not specify WHICH iPads work.  We have two defining requirements, the need for the lightning connector and the fact that the iSense  requires the A6x or A7 CPU.

The iPads running on the A6X are:

•  iPad 4th Gen (Wi-Fi Only) 
•  iPad 4th Gen (Wi-Fi/AT&T/GPS) 
•  iPad 4th Gen (Wi-Fi/Verizon & Sprint/GPS)

Those running on the A7 are:

• iPad Air
• iPad Mini 2 
• iPad Mini 3

So, it is VERY important that you make sure that the iPhone or iPad that you plan to use with the iSense is compatible.  The original iPad Mini used an a5 chip and probably would not be powerful enough.

Ordering the iSense for the iPhone

At first, if you want to use the iSense with the iPhone6 , you will need to order the iPhone6 version because the custom iPhone6 case will not be available as a separate option for a bit.  But, brackets for the iPads should be available as an extra option so that you can use the iSense across several platforms.  (I expect we could even print the brackets for the iPad 4, iPad Air and iPad Mini; but, don't quote me.)

For current iSense owners, the updated software applications are available for download on the iOS App store.

Here is today's press release.  Yes, it's a cut & paste...... A first on these pages

3D Systems Expands Popular iSense 3D Scanner to iPhone 

• iSense now available for iPhone 6 and iPhone 6 Plus smartphones
• New iSense 2.0 app for iOS improves vibrancy of full-color scans for iPhone and iPad users
• Updates include higher speed, enhanced auto-tracking and texture mapping

ROCK HILL, S.C., June 16, 2015 (GLOBE NEWSWIRE) 

3D Systems (NYSE:DDD) announced today that the popular iSense^TM 3D scanner is now available for the iPhone^®, making it more portable than ever. Designed with an exclusive 3D printed case from Cubify^® users can simply snap the iSense case onto their iPhone and immediately begin to transform real life people or objects into digital three-dimensional scans anywhere and anytime. Watch a video here to see the iSense in action.

The new iSense also includes a major upgrade for the iSense app, available for both iPhone and iPad^® users for free. The new app upgrade offers enhanced tracking, increased speed up to 3 times faster than previous versions, and full-color vibrancy via texture mapping. Improvements made to the tracking and speed deliver a smoother and easier scanning experience, quicker average scan times of 5 to 30 seconds, and an enjoyable user experience. This major app update is available for free to all existing iSense owners in the iOS app store.

The iSense is the only 3D scanner that provides easy, quick, precise, instant physical photography in full color that works with an iPhone or iPad. The versatile scan volume allows for iSense users to capture objects in a variety of sizes with ease and quality. The intuitive interface makes it simple to edit 3D files and prepare them for 3D printing, making it easy to convert the physical world into digital before returning it to physical again.

The iSense 3D Scanner uses a scanning engine by Occipital for its capture technology, and the 3D Systems iSense software app for processing and editing the data as part of a collaboration between 3DS and Occipital to innovate and optimize mobile 3D scanning for 3D printing.
 

"Working with 3D Systems has let us bring the latest improvements to our 3D scanning engine from the iPad to the iPhone for the first time ever," said Adam Rodnitzky, Vice President of Marketing for Occipital. "The iSense for iPhone and iPad brings the powerful and unique capabilities of content optimization for 3D printing designed for consumer use."

The iSense for iPhone is immediately available for pre-order on Cubify with commercial shipments expected to commence July 7, 2015. Priced at $499, the iSense for iPhone and iPad will be available on Cubify as well as at retailers B&H Photo and BestBuy.com.

Product Features:

Physical photography for iPhone and iPad

Discover the power of mobile 3D scanning on your iPhone, iPad, iPad Air, iPad Air 2 or iPad mini with the new iSense. Its integrated design makes it easy to capture every dimension of your favorite moments on your Apple device. Scan your family and friends, everyday events and adventures, all on your iPhone or iPad, all in 3D.

Big or small, scan it all

From shoes to SUVs, iSense has the most versatile scan range in its class with auto-optimized settings for objects large and small.

Edit with ease

With quick cropping, enhancement and solidifying tools, iSense can prepare 3D printable files within minutes.

Scanned for 3D printing

Physical to digital, and back again. Fully integrated with Cubify.com and your Cube 3D printer, iSense allows you to upload scans directly for 3D printing, either at home or through cloud printing.

Zero in on what matters

Automatic object recognition extracts precise targets from the busiest of backgrounds.

Upgrade your iPhone or iPad and get inspired on the go

The compact snap-on design of iSense instantly transforms your Apple device into a 3D scanner, giving you the freedom to scan spontaneously wherever you are. Purchase multiple brackets to fit all your iPad and iPhone sizes. Take it with you and allow your physical world to spark your creativity.

Learn more about 3DS' commitment to manufacturing the future today at www.3dsystems.com and the company's consumer offerings at www.cubify.com.

  

MORE Good news! iSense for the iPhone!!!

You may have already been sent an announcement; but, in case not. I just HAD to let you know about this one... the iSense for the iPhone.

iSense for the iPhone

The description implies that this new release fits both iPhones and iPads having the Apple Lightning connector.

Lest you fear that the small screen on an iPhone would be an impediment, I have mated an even smaller display to my original Sense and KNOW that being able to see the scan directly in line with the scanner makes an amazing difference in scan reliability and quality.   I absolutely trust that the same will be true of the iPhone.

I would post a picture of my modified Sense; but, it's on loan to Animal Ortho Care, a very cool company that regularly uses the Sense in their work creating orthopedic devices for animals.  They've had a Sense for a long time; but, wanted to evaluate the usefulness of attaching a small monitor to the Sense.  But, picture or not, I know that being able to view the scan directly, even on a smaller screen, is highly beneficial.

I am a fan of the Sense.  I know it works when used properly for the applications for which it is intended.  But, the iSense for the iPhone takes the concept to a whole new level.

Think about it. With the full color CubeJet potentially shipping by the end of the year, the full color iSense, with the upgraded software that was released earlier, is a perfect accessory.  And, even for those of us with the Cube and CubePro machines, the iSense only adds to the fun.

I can tell you this.  The cadets in our YouthQuest 3D ThinkLink Lab classes are going to go bonkers over this one.  As Uncle Sy Robertson would say. "That's a FACT Jack!"**  :)

** Sorry about that; but, the redneck in me just breaks loose at times. Especially when I get as excited as this over something.   LOL!

dear buyers

dear buyers

Good News! Wider Availability of Cube3 Cartridges from Reliable Vendors

While shopping at a local MicroCenter store I stumbled across an entire shelf of 3rd Gen Cube cartridges.  This is great news because it means instant availability of filament when I need it.  Then I realized that I had not checked online vendors in a while.  So, I decided to find other retailers where we can order 3rd Gen Cube and CubePro cartridges.

While not as convenient as my local MicroCenter store, B & H Photo's shipping usually gets things to my door in one day... at either free or standard shipping costs.  So, if you don't have a local source and you need it fast, check out B & H Photo.  Adorama is another very reliable vendor.  And, they were the only one to advertise a Cube 3D printer at a sale price ($860.97) .and free shipping at the time of this writing.  But, they often use FedEx Ground which can take a few more days than B & H Photo provides.  I'm told that B & H Photo has their own UPS terminal and I believe it.

So here are some great options for you when you need that next batch of filament in a hurry.

B & H Photo 

Online with very reliable and fast delivery.

Search Terms:  "3D Systems Cube 3 PLA", "3D Systems Cube 3 ABS" or "3D Systems Cube 3" 

B & H Photo carries the entire 3rd Gen Cube and CubePro lines including printers, cartridges, glue and accessories.  They also carry filament for the 1st and 2nd Gen Cube printers.

Products arrive the next day in the Mid-Atlantic region even with standard shipping   I've trusted this company for decades and can't say enough about their reliability and honesty.  Ask any professional photographer.

MicroCenter

Online and local in 25 locations. 

Search Term: "3D Systems"

Most if not all, local stores carry some cartridges in stock.  Local stock can be verified through the online store.  They also sell the 3rd Gen Printer through their online store.  They do not carry CubePro cartridges.

Adorama

Online with very reliable service.

Search Term: "3D Systems"

Like B & H Photo, Adorama is famous for reliable and honest service among professional photographers.  I've purchased from them as long as I have B & H Photo and have never had a problem. 

They carry both the 3rd Gen Cube and the CubePro along with cartridges for both.

At the current time they are selling the gray version of the Cube3 for $860.97 with free shipping. 

Staples 


Online and limited local

Search Term: "3D Systems"

Staples' online store carries both the 3rd Gen Cube (free shipping) and the CubePro printers.  But, they only carry Cube materials (1st, 2nd & 3rd Gen).  The last time I checked, very few stores stocked materials locally. 

Print Your Own Games With MakerModel's Clever Designs

The cool thing about blogging is that it brings fun things into your life.  And, what I'm going to talk about in this blog article is at the top of the heap when it comes to fun.

Thanks to a Cube3 owner's (Don Oldham) creativity, cleverness and skill, anyone with a 3D printer can purchase, print and play some games that promise to be a lot of fun for children and grandchildren!

The web site is Maker Models. 

Maker Models Battle Fun

There are a number of games available. And, the designs are quite sophisticated.

Marble Run

Here is a short video that demonstrates Marble Run Motorized Chutes, one of two versions of Marble Run offering.

 

I love the reaction of the children.  My own grandchildren are teens now; but, I remember them at the age of the children in the video and that sound of shear joy remains a very happy memory for me.  

Not only do they offer the STL files to print the parts; but, the non-printed parts from a single source that makes it easy to get up and running fast.

The fun doesn't stop there.

Marble Race

Marble Race allows up to five players to race their own marbles around a track that actually allows passing.  Pretty clever!

Marble Race

This is pretty slick.

If my father were still alive, I can visualize him beating all challengers and creating an "All-Time All-Time Champion" badge that he wore proudly each time the game was played.  :)

Among my siblings and our friends, my father is legendary as the person ALL of us wanted to beat and rarely succeeded.  We didn't play Croquet.  We played Cutthroat Croquet were you knew for sure that sooner or later your ball (usually by Dad) would be driven deep into the most dense overgrowth!  :)

I wish there was a video of this game in action.  In its absence I can just visualize the gleeful chaos.  Providing the opportunity for marbles to pass each other is a stroke of genius.

Battle Fun

Soldiers, castles and towers.  This is Battle Fun.

Battle Fun

Not only does Maker Models offer the STL files for the game pieces; but, also make available a case for all those parts and STL files for the case dividers.  The cannons are even able to shoot rubber cannon balls which is my kind of fun.  :)

Fish Line Splicer

Along with the games, there is a useful tool for those that love to fish.  The Fish Line Splicer is a device that aids in the spicing of braided fishing lines.  Pretty clever.

Fish Line Splicing Tool

I love creative solutions to everyday challenges and this definitely qualifies.

The prices seem very reasonable to me.

I actually appreciate the fact that there is a small cost for the STL files.  That is because the lamentable fact is that free files don't provide the support for talented designers like Don Oldham that allows them to continue to design and that is a loss for the whole 3D printing community.  I WANT to see people like the designers being able to design more clever and fun games that all of us can enjoy!

Keep it up Don!

There is a Need for Cubify Invent and Design Tutorials

When I got my first 3D printer, I also picked up Cubify Invent and created some introductory lessons.  But, as time passed and I began to teach Moment of Inspiration to Touth ChalleNGe cadets for YouthQuest, I found that I no longer had the time to continue with the Invent tutorials.

However, I continue to get many requests for help and suggestions for helpful tutorials from Invent and Design users. 

There is genuine interest in more tutorials and I'd love to find someone interested in helping fellow Cubify readers by creating tutorials from where I left off or by pointing us to existing tutorials.

Please contact me if you are aware of additional tutorials or are interested in creating some yourself.  There is DEFINITELY a demand for them.

For Those Interested in Meshmixer Training

I want to point you to a KickStarter campaign that will allow you to get 20 hours or more of training in Meshmixer at a very small cost.  But, you only have 9 more days to take advantage of the opportunity.

Meshmixer Training KickStarter Campaign

It looks like a fantastic opportunity to me and I signed up as a backer.

And, please don't forget that you still have time to pledge to YouthQuest's KickStarter to complete our Moment of Inspiration online training.  It's not an either/or proposition. Both campaigns deserve a good look for your possible support.  But, we cover complementary training with similar goals... enabling children and adults to ideas into reality through 3D Design.

Cubify Client 3.0 - A Significant Improvement

Here is a video showing the significant changes to the new Cubify Client 3.0. 

Downloading this version is definitely worth your time.

We can now stay in the PRINT Tab for the bulk of the time.  We can add items by dropping and dragging from Explorer and delete items from the table right from the Print Tab.

There is a series of help screens that will be really helpful for new users.  And, it is more clear as to whether we have supports and sidewalk turned on.  The latter has been available for the CubePro for some time and now is a highly visible functionality for the Cube3.  The primary benefit of sidewalk s to provide addedd adhesion to the print table and extra stability to objects without supports.

Check it out!

Kudos to the Cubify Client design team!  Nice changes.  :)